3/8" Flex System - Basic

Flex System - Basic - totally manual. Screws into a hose bib and when you open the flow you will get mist. Quality of the mist is based on your water pressure. 

The name "Flex system" refers to the extreme flexibility with respect to breadth of possible applications. This system can be used as one straight line of misting nozzles or it can be split into several rows. You can just as easily adapt the FLEX system into a backyard misting setup or into a greenhouse, barn, stable or a ZOO. Whatever your requirement, the FLEX system can probably be used, limited only by your imagination.

Due to the fact that your particular need and budget may vary we have created 5 different FLEX system variants. Each geared more towards the connection you have and amount of control you wish to have. Look through these and decide which would best fit your needs.

NOTE: It's important to know, that a Pump does not act as a valve. So even if you have a booster pump on the system, if it's connected to a pressurized source, like a faucet, the water will pass through the pump when the pump is OFF. Therefore a pump alone is not suitable to be used with a pressurized water feed. You would require an electromagnetic shut off valve to be connected to the pump and turned ON at the same time.